DONATE

Publications

by Keyword: Surface topography

Garcia-de-Albeniz, N, Ginebra, MP, Jimenez-Piqué, E, Roa, JJ, Mas-Moruno, C, (2024). Influence of nanosecond laser surface patterning on dental 3Y-TZP: Effects on the topography, hydrothermal degradation and cell response Dental Materials 40, 139-150

Laser surface micropatterning of dental-grade zirconia (3Y-TZP) was explored with the objective of providing defined linear patterns capable of guiding bone-cell response.A nanosecond (ns-) laser was employed to fabricate microgrooves on the surface of 3Y-TZP discs, yielding three different groove periodicities (i.e., 30, 50 and 100 µm). The resulting topography and surface damage were characterized by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). X-Ray diffraction (XRD) and Raman spectroscopy techniques were employed to assess the hydrothermal degradation resistance of the modified topographies. Preliminary biological studies were conducted to evaluate adhesion (6 h) of human mesenchymal stem cells (hMSC) to the patterns in terms of cell number and morphology. Finally, Staphylococcus aureus adhesion (4 h) to the microgrooves was investigated.The surface analysis showed grooves of approximately 1.8 µm height that exhibited surface damage in the form of pile-up at the edge of the microgrooves, microcracks and cavities. Accelerated aging tests revealed a slight decrease of the hydrothermal degradation resistance after laser patterning, and the Raman mapping showed the presence of monoclinic phase heterogeneously distributed along the patterned surfaces. An increase of the hMSC area was identified on all the microgrooved surfaces, although only the 50 µm periodicity, which is closer to the cell size, significantly favored cell elongation and alignment along the grooves. A decrease in Staphylococcus aureus adhesion was observed on the investigated micropatterns.The study suggests that linear microgrooves of 50 µm periodicity may help in promoting hMSC adhesion and alignment, while reducing bacterial cell attachment.Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.

JTD Keywords: abutment material, alumina toughened zirconia, antibacterial, bacterial adhesion, biofilm growth, cell adhesion, dental implants, hydrothermal degradation, implant surfaces, in-vitro, laser patterning, osseointegration, osteogenic differentiation, part 1, surface topography, y-tzp ceramics, Antibacterial, Antibacterials, Bacteria, Bone, Cell adhesion, Cell culture, Cells adhesion, Ceramics, Chemistry, Degradation resistance, Dental implants, Dental material, Dental materials, Dental prostheses, Human, Human mesenchymal stem cells, Humans, Hydrothermal degradation, Laser patterning, Laser surface, Lasers, Low-temperature degradation, Materials testing, Microscopy, electron, scanning, Nanosecond lasers, Osseointegration, Piles, Scanning electron microscopy, Staphylococcus aureus, Stem cells, Surface analysis, Surface damages, Surface properties, Surface property, Surface topography, Topography, Yttrium, Zirconia, Zirconium


Abadías, Clara, Serés, Carme, Torrent-Burgués, J., (2015). AFM in peak force mode applied to worn siloxane-hydrogel contact lenses Colloids and Surfaces B: Biointerfaces 128, 61-66

The objective of this work is to apply Atomic Force Microscopy in Peak Force mode to obtain topographic characteristics (mean roughness, root-mean-square roughness, skewness and kurtosis) and mechanical characteristics (adhesion, elastic modulus) of Siloxane-Hydrogel Soft Contact Lenses (CLs) of two different materials, Lotrafilcon B of Air Optix (AO) and Asmofilcon A of PremiO (P), after use (worn CLs). Thus, the results obtained with both materials will be compared, as well as the changes produced by the wear at a nanoscopic level. The results show significant changes in the topographic and mechanical characteristics of the CLs, at a nanoscopic level, due to wear. The AO CL show values of the topographic parameters lower than those of the P CL after wear, which correlates with a better comfort qualification given to the former by the wearers. A significant correlation has also been obtained between the adhesion values found after the use of the CLs with tear quality tests, both break-up-time and Schirmer.

JTD Keywords: Adhesion, Atomic force microscopy-peak force mode, Surface topography, Worn siloxane-hydrogel contact lenses, Young modulus


Álvarez, Z., Sena, E., Mattotti, M., Engel, E., Alcántara, S., (2014). An efficient and reproducible method to culture Bergmann and cortical radial glia using textured PMMA Journal of Neuroscience Methods , 232, 93-101

Background: Radial glia cells comprise the principal population of neural stem cells (NSC) during development. Attempts to develop reproducible radial glia and NSC culture methods have met with variable results, yielding non-adherent cultures or requiring the addition of growth factors. Recent studies demonstrated that a 2-μm patterned poly-methyl methacrylate (ln2 PMMA) grooved scaffold, by mimicking the biophysical and microtopographic properties of the embryonic NSC niche, induces the de-differentiation of glial cells into functional radial glia cells. New method: Here we describe a method for obtaining cultures of adherent Bergmann radial glia (BRG) and cortical radial glia (CRG). The growth substrate is ln2 PMMA and the addition of growth factors is not required. Results: Postnatal glia obtained from mouse cerebellum or cerebral cortex and grown on ln2 PMMA adopted a BRG/CRG phenotype characterized by a bipolar shape, the up-regulation of progenitor markers such as nestin and Sox2, and the down-regulation of vimentin and GFAP. Neurons cultured over the BRG/CRG aligned their processes with those of the glial shafts, thus mimicking the behavior of migrating neuronal cells. Comparison with existing methods: The ln2 PMMA culture method offers an ideal system for analyzing both the biochemical factors controlling the neurogenic potential of BRG/CRG and neuronal migration. Conclusions: The ln2 PMMA method is a reproducible system to obtain immature BRG/CRG preparations in vitro. It can be used to study the properties of CNS progenitor cells as well as the interactions between radial glia and neurons, and supports cultured progenitors for use in different applications. © 2014 Elsevier B.V.

JTD Keywords: Astrocytes, Bergmann glia, Micro-patterning, Poly-methyl methacrylate (PMMA), Progenitors, Radial glia, Surface topography


Mattotti, Marta, Alvarez, Zaida, Ortega, Juan A., Planell, Josep A., Engel, Elisabeth, Alcántara, Soledad, (2012). Inducing functional radial glia-like progenitors from cortical astrocyte cultures using micropatterned PMMA Biomaterials 33, (6), 1759-1770

Radial glia cells (RGC) are multipotent progenitors that generate neurons and glia during CNS development, and which also served as substrate for neuronal migration. After a lesion, reactive glia are the main contributor to CNS regenerative blockage, although some reactive astrocytes are also able to de-differentiate in situ into radial glia-like cells (RGLC), providing beneficial effects in terms of CNS recovery. Thus, the identification of substrate properties that potentiate the ability of astrocytes to transform into RGLC in response to a lesion might help in the development of implantable devices that improve endogenous CNS regeneration. Here we demonstrate that functional RGLC can be induced from in vitro matured astrocytes by using a precisely-sized micropatterned PMMA grooved scaffold, without added soluble or substrate adsorbed biochemical factors. RGLC were extremely organized and aligned on 2 μm line patterned PMMA and, like their embryonic counterparts, express nestin, the neuron-glial progenitor marker Pax6, and also proliferate, generate different intermediate progenitors and support and direct axonal growth and neuronal migration. Our results suggest that the introduction of line patterns in the size range of the RGC processes in implantable scaffolds might mimic the topography of the embryonic neural stem cell niche, driving endogenous astrocytes into an RGLC phenotype, and thus favoring the regenerative response in situ.

JTD Keywords: Polymethylmethacrylate, Micropatterning, Surface topography, Astrocyte, Nerve guide, Co-culture


Pegueroles, M., Aparicio, C., Bosio, M., Engel, E., Gil, F. J., Planell, J. A., Altankov, G., (2010). Spatial organization of osteoblast fibronectin matrix on titanium surfaces: Effects of roughness, chemical heterogeneity and surface energy Acta Biomaterialia 6, (1), 291-301

We investigated the early events of bone matrix formation, and specifically the role of fibronectin (FN) in the initial osteoblast interaction and the subsequent organization of a provisional FN matrix on different rough titanium (Ti) surfaces. Fluorescein isothiocyanate-label led FN was preadsorbed on these surfaces and studied for its three-dimensional (3-D) organization by confocal microscopy, while its amount was quantified after NaOH extraction. An irregular pattern of adsorption with a higher amount of protein on topographic peaks than on valleys was observed and attributed to the physicochemical heterogeneity of the rough Ti surfaces. MG63 osteoblast-like cells were further cultured on FN-preadsorbed Ti surfaces and an improved initial cellular interaction was observed with increasing roughness. 3-D reconstruction of the immunofluorescence images after 4 days of incubation revealed that osteoblasts deposit FN fibrils in a specific facet-like pattern that is organized within the secreted total matrix overlying the top of the samples. The thickness of this FN layer increased when the roughness of the underlying topography was increased, but not by more than half of the total maximum peak-to-valley distance, as demonstrated with images showing simultaneous reconstruction of fluorescence and topography after 7 days of cell culture.

JTD Keywords: Fibronectin, Extracellular matrix organization, Titanium, Surface topography, Surface energy